How To Install A Grease Cartridge In A Grease Gun

Download Commodity

Download Article

Grease guns assistance go on your equipment and machinery running in tip-pinnacle shape. While these tools look intimidating to refill, y'all can easily reload your grease gun inside a matter of minutes. If you're using a new tool, bank check the model to encounter if information technology needs to be refilled with a cartridge or bucket. If y'all're using an old tool, remove the acme of the grease gun and pump the plunger to run into if an empty cartridge comes out.^[1] If no cartridge appears, you tin assume that your tool needs to be refilled with a saucepan. With a scrap of exercise, you lot can put your all-time forward when using your grease gun in future projects.

1. 1

   Unscrew the main canister from the caput of your grease gun. Rotate the grease gun's base, which looks like a large cylindrical canister, counterclockwise. Keep twisting the canister until you lot've detached it from the head and nozzle of the gun.^[2]

   • The pinnacle portion of the grease gun is ofttimes referred to as the head.

2. 2

   Pump the plunger to remove the empty cartridge. Once the the height of the gun is removed, extend and push in the plunger forth the bottom of the tool. Watch as the empty cartridge is partially forced out of the grease gun, and then use your hands to remove it completely.^[3]

   • If the empty cartridge has a lot of grease on information technology, apply a newspaper towel when removing it.

   Did yous know? Nearly grease guns are operated with cartridges. If pumping the plunger doesn't release an empty cartridge, then you can assume that your grease gun can be refilled with a bucket.^[4]

   Advertisement

3. 3

   Extend the plunger from the back of the gun and secure it in place. Wrap your pointer and center finger beneath the grease gun'due south handle and pull upwards. Remove the plunger completely, then listen for a sound of air releasing, which means that it's fully extended.^[five]

   • Some grease guns have a groove near the base of the plunger, which helps secure and lock the plunger into place. If your tool has this characteristic, push the plunger into the groove every bit an extra security measure.

4. iv

   Twist the cap off the bottom of the new cartridge. Examine your new cartridge of grease to discover an end with a metal tab, as well as an end with a plastic cap. Rotate the plastic cap counterclockwise to remove it all the way.^[half-dozen]

   • The cartridge is always installed in the grease gun with the cap side down.
   • You might need to apply a lot of strength to twist off the cap completely.

5. 5

   Slide the capless side of the cartridge into the canister. Eye the new cartridge over the peak opening of the canister. Double-check that the section of the cartridge with the removed cap is facing downwards, then push the cartridge into the grease gun. One time the entire item is in the grease gun, press along the top to ensure that the cartridge is firmly installed in the tool.^[7]

   • The side with the metal tab needs to be facing upward.

6. six

   Remove and pare away the tab on the top side of the cartridge. Pretend you're opening a can of soda or cat nutrient, and remove the tab on the grease can in the same way. Once you've loosened and popped the tab, skin the metal lid off of the cartridge. If there'south a lot of grease stuck to the inner lid, be certain to scrape it into the open container of grease.^[8]

7. vii

   Spiral the caput of the grease gun partially onto the canister. Take the top portion of the grease gun and adapt it on superlative of the canister. Employ clockwise motions to twist the head partially dorsum onto the gun. Don't completely reattach it—instead, spiral it about halfway onto the grease canister.^[9]

8. eight

   Push on the locked plunger to get rid of any air bubbles. While keeping the plunger locked in the groove, press on the handle to create tension in the base of the grease gun. The plunger itself won't move, but y'all'll be removing whatever leftover air bubbles from inside the gun.^[10]

9. ix

   Secure the grease gun head onto the canister. Twist the top of the tool clockwise to tighten and completely reattach information technology to the rest of the grease gun. Before you apply the tool, double-bank check that the head is completely secure and that in that location are no gaps or leaks nowadays.^[11]

   Ad

1. 1

   Unscrew the canister from the summit of your grease gun. Use both hands to rotate the principal section, or canister, counterclockwise from the caput of your tool. Continue twisting until both parts of the grease gun are completely separated from one another.^[12]

   • With this style of grease gun, the grease volition fill the canister itself instead of a separate cartridge.

2. 2

   Rotate the bottom cap to remove it from the canister. Examine the canister to find a sturdy cap attached to the bottom of the tool. Twist counterclockwise to loosen the cap, which will make it easier to remove the piston and spring from the grease gun.^[xiii]

3. three

   Slide the piston out of the chief canister. Use i hand to slowly pull the piston and its accompanying leap out of the grease gun. Endeavour to keep the tool as level as possible while you lot piece of work.^[14]

4. 4

   Flip the condom seal up so information technology covers the end of the piston. Find the metal circumvolve along the edge of the rod, which has a black seal surrounding it. Use your fingers to button along the edges of the piston seal, creating a segmentation around the edge of the piston. By doing this, you create a secure seal for when the canister is filled with grease.^[15]

   • When the seal is turned downward, the grease gun can hold a cartridge.

5. five

   Reattach the cap to the central canister. Slowly push the piston dorsum into the canister. Plough the cap clockwise to connect it to the central canister and so there won't be any grease leaks afterwards on. At this point, cheque that the plunger is fully inserted in the back of the grease gun.^[16]

   • Make sure that you're connecting the cap tightly and securely, or else air bubbles might form in the grease after.

6. 6

   Dip the canister into a grease bucket and extend the back plunger. Hold the canister in one hand while using your opposite mitt to concord the base of the plunger. Place the tip of the canister about 2 in (v.1 cm) into an open bucket of grease, then pull slowly on the plunger. Extend the plunger to its total length to create a suction force, which sucks grease into the tool.^[17]

   • Try to pull on the plunger slowly.

7. 7

   Wipe off any excess grease with an onetime material or rag. Grab an old rag and mop up an actress grease blanket the sides and rim of the canister. In one case you've wiped upward the tool, y'all tin discard the rag or identify it in a bin to wash subsequently.^[18]

8. 8

   Reconnect the grease gun head partially to the filled canister. Center the top portion of the grease gun on pinnacle of the canister, then rotate it clockwise several times to begin reattaching it. Stop rotating once both components are partially secured together.^[19]

9. nine

   Push the plunger into the canister to become rid of any excess air. Use one hand to hold the grease gun in place, and some other to reinsert the plunger into the canister. Apply a tiresome, steady pressure to the plunger every bit yous stick information technology dorsum in the grease gun so the grease won't take any air bubbling.^[twenty]

   • If your grease gun has air bubbles inside, information technology might not work properly or efficiently.

10. ten

    Tighten the grease gun head to the canister. Cease twisting the elevation portion of the tool clockwise until information technology'due south firmly attached to the canister. Earlier you lot use your grease gun, bank check that in that location are no gaps betwixt the top and fundamental portions of your tool.^[21]

    • If there are any gaps between the head and canister portions of the gun, air bubbles could course later.

    Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertising

• Consider wearing protective work gloves so you don't get grease on your peel.^[22]

Thanks for submitting a tip for review!

Advertizing

Things You'll Need

• Grease canister

• Grease bucket
• One-time cloth or rag

About This Commodity

Thanks to all authors for creating a page that has been read 17,297 times.

Did this commodity aid you?

Source: https://www.wikihow.com/Replace-Grease-in-a-Grease-Gun

Posted by: hugheypastachis.blogspot.com

Share this post